Cleaning, Maintenance And Storage; 0. T Raveling With The; Smoothskin Bare; 2. Warranty - Smoothskin BARE+ Guia Del Usuario

9. CLEANING, MAINTENANCE AND STORAGE

After treatment, always switch off SmoothSkin Bare+by unplugging from the Electrical Outlet.
After use, the Handset, Skin Tone Sensor and Treatment Window should be inspected for damage and wiped down with a dry, lint free cloth.
WARNING: The glass filter can get hot during use. DO NOT touch or clean the filter for at least 5 minutes after use to allow it to cool down.
NEVER use water or other cleaning fluids, as these can damage the device leading to a
potential safety hazard.
If necessary, the Reflector and Skin Tone Sensor can be carefully cleaned by using a
slightly damp cotton bud.
Store SmoothSkin Bare+ in a cool, dry place. Make sure that the Treatment Window and
Skin Tone Sensor on the Handset are protected from damage.
Regularly check the device (including cords) for visible signs of damage. In case of
damage or cracks, stop using the device - and visit the website for support details.
10. TRAVELING WITH THE

SMOOTHSKIN BARE+

The Power Supply unit of the SmoothSkin Bare+ is universal and will work with all commonly encountered mains supplies. Providing you have
a suitable adaptor for the mains power cable plug, the SmoothSkin Bare+ will operate as normal.
26
Skin Tone
Sensor
Reflector
11. TROUBLESHOOTING
PROBLEM
The Activation Button Lights on the Handset do not light up
when placed against your skin.
The Activation Button on the Handset lights up white when
placed on the skin, but the Handset fails to flash when the
Activation Button is pressed.
The Activation Button Lights on the Handset are illuminated red
continuously, and the device will not function.
The SmoothSkin Bare+ Handset, Treatment Window, Power
Supply or cable are damaged, broken, cracked or appear
defective.

12. WARRANTY

We grant a 2 year warranty on the product starting on the date of purchase. Within the warranty period, we will check faults in materials or
workmanship free of charge and replace the complete device, at our discretion.
This warranty extends to every country where this device is supplied by CyDen or its appointed distributor.
This warranty does not cover damage due to improper use, normal wear or use as well as defects that have a negligible effect on the value or
operation of the appliance. The warranty becomes void if repairs are undertaken by unauthorised persons and if original SmoothSkin Bare+
parts are not used. To obtain service within the warranty period, please visit our website:
To obtain service within the warranty period, please visit our website:
www.smoothskin.com.
SOLUTION
Make sure the power supply is plugged in. Ensure the Skin
Tone Sensor is fully
pressed against the skin. Your skin could be too dark for
treatment. Check against the skin tone chart in the front of
this user guide.
There could be a fault with the device. Unplug the device
and restart. If the problem persists, visit the website for
support details.
This indicates that there is a fault with the device. Stop using
the device and visit the website for support details.
DO NOT USE. If you are in any doubt about the safety of
SmoothSkin Bare+ or suspect it is damaged in any way,
it must not be used, and you should visit the SmoothSkin
website for more information.
www.smoothskin.com.
27