Stanley LD100 Manual Del Usuario página 9

Function
Power ON / OFF
Bubble Level
Vertical Beam
Move Detector
in Indicated
Direction
In-Line
Laser Detector with Detector Clamp
77-023
1.
Low Battery LED
2.
Volume
3.
Horizontal Beam
4.
Laser
Detection
Window
5.
1.
Press power key to power ON / OFF. Replace
battery when low battery LED lights red.
Press volume key 1x for low volume, 2x to
mute, 3x for high volume.
Orient detector for the appropriate beam
type. Laser unit must be in pulse mode. Use
the bubble levels to keep detector level.
Directional LEDs light red to indicate
direction detector must move to be in-line
with laser beam.
LED lights blue to indicate detector is in-line
with laser beam.
Fit pin into algnment hole. Tighten mounting
screw. Clamp onto pole.
9