Petsafe PPA19-16145 Guia De Inicio Rapido página 3

Thank you for choosing the PetSafe Brand. You and your pet deserve a
®
companionship that includes memorable moments and a shared understanding
together. Our products and training tools enhance the relationship between
pets and their owners. If you have any questions about our products
or training your pet, please visit our website at www.petsafe.com
or contact our Customer Care Centre. For a listing of Customer Care
Centre telephone numbers, visit our website at www.petsafe.com.
To get the most protection out of your warranty, please register your product
within 30 days at www.petsafe.com. By registering and keeping your receipt,
you will enjoy the product's full warranty and should you ever need to call the
Customer Care Centre, we will be able to help you faster. Most importantly,
your valuable information will never be given or sold to anyone. Complete
warranty information is available online at www.petsafe.com.
Programming Cats into the PetSafe
Microchip Cat Flap
Your PetSafe Microchip Cat Flap is designed to work with most 15-digit
®
microchips (FDX-B) used for pets. Before you begin setup or installation of the
cat flap, please ensure your cat has the correct type of microchip.
To begin operation, the cat flap must learn the unique microchip Identification
Number (ID) of your cat. Please follow the steps below to begin the setup of
your cat flap:
1. The cat flap will be factory pre-set in the locked position. Ensure the
manual lock is set to the In and Out position (See Fig.H).
2. Remove the battery cover, set aside the provided hardware pack, and
install 4 alkaline AA batteries (LR6). The green LED light will flash three (3)
times which indicates that the cat flap is in Automatic Mode.
3. To enter Learn Mode, press and hold the button until the red LED light
appears (about 5 seconds). You will have 60 seconds to position the cat's
head in the tunnel to learn the microchip ID. Once the cat flap has learned
the microchip ID, it will unlatch and the red LED will turn off. The cat flap
will stay in Automatic Mode and will re-latch after 3 seconds.
4. After successfully learning the cat's microchip ID, you will be ready to
install the cat flap into your door.
Note: To learn more than one cat, please follow the same steps starting with
step No. 3. The microchip cat flap can store up to 40 microchipped cats.
Replace the battery cover when the process is complete for all cats.
Helpful Tip: Program your cat's microchip ID
before installation to prevent having to hold your
cat in the cat flap once it is installed. If you are
having trouble programming your cat's
microchip ID, please ensure that their
head is extended into the tunnel or they
pass all the way through the cat flap. You
should hear the cat flap unlatch once it
has learned your cat's microchip ID.
®
Accessories available online
3