Parts & Maintenance; Technical Data - Urrea UPX731 Manual Del Usuario

MAINTENANCE
Maintenance frequency is shown in the illustra-
tion below.
PARTS & MAINTENANCE
Tool repair and maintenance should only be
carried out by an authorized Service Center.
When the life of the tool has expired, it is rec-
ommended that the tool be disassembled, de
greased and parts be separated by material so
that they can be recycled.

TECHNICAL DATA

Square drive
Maximum torque
No load speed
Impacts per minute
Working pressure
Air inlet
Air consumption
Weight
90 psi
UPX727 UPX731
3/8" (9,5 mm) 1/2" (12,7 mm)
400 ft-lb 1 000 ft-lb
11 000 r/min 7 000 r/min
1 600 1 200
90 PSI 90 PSI
1/4" NPT 1/4" NPT
4 CFM 4 CFM
1,2 kg (2,6 lb) 1,9 kg (4,18 lb)
E N G L I S H •
LUBRICATION
The parts shown in the assembly for proper
operation of your air tools are identified as fol-
lows:
1. Air filter.
2. Regulator.
3. Lubricator.
4. Emergency shut-off valve.
5. Hose diameter.
6. Thread size.
7. Coupling.
8. Safety Air Fuse.
9. Oil.
10. Grease (During assembly).
48h
UPX731A UPX731B
1/2" (12,7 mm) 1/2" (12,7 mm)
1 000 ft-lb 500 ft-lb
7 000 r/min 8 000 r/min
1 200 1 200
90 PSI 90 PSI
1/4" NPT 1/4" NPT
4 CFM 5,8 CFM
2 kg (4,4 lb) 1,11 kg (2,44 lb)
U s er 's M an u al
24h
UPX776 UPX893
3/4" (19 mm) 1" (25,4 mm)
1 400 ft-lb 1 400 ft-lb
5 500 r/min 5 500 r/min
1 000 1 000
90 PSI 90 PSI
3/8" NPT 3/8" NPT
7 CFM 7 CFM
3,4 kg (7,49 lb) 3,5 kg (7,71 lb)
7