After Use - T-Fal IS5510 Instructivo De Operación

9100017370 IS5510 Q0-X0_110x154 26/06/14 16:17 Page6

After use

• After using the steamer, turn the switch to 'OFF'
position. Once the power indicator light turns off,
you can unplug the appliance.
• Hang the steam head in an upright position on the
hook when not in use.
• Ensure that the appliance has cooled down
completely. Fold the hanger and shorten the
telescopic pole if you want to easily store the
appliance away.
• Empty and rinse the water tank each time before
storage in order to flush out any scale particles -
fig.19
.
• Do not carry the steamer by the water tank handle.
This appliance includes luggage style wheels for
added convenience when transporting.
• You can store your accessories in the storage
compartment.
Cleaning
• Clean the main unit with a damp cloth. To maintain
maximum performance, your steamer must be
descaled occasionally. The time between descaling
operations depends on the quality of the water and
the frequency with which you use the appliance.
The appliance must be descaled at least once every
6 months, after 30 hours of use or after 30 sessions.
• To carry out a descaling operation, follow the
following steps:
1. Ensure that the appliance has cooled down
completely.
2. Remove the hose and pole from the unit.
3. Pour 200cl vinegar and 200cl fresh water into the
hose connector.
4. Allow standing for 60 minutes.
5. Drain the solution out by open the boiler rinsing
fig.20
cap -
a sink.
and allowing the liquid to drain into
Warning: Never touch
the steam head until it
has cooled down
completely.
CAUTION: Don't fill
the boiler by the
steam head holes!
Never immerse the
steam head in water!
The steam handle
contains electronic
components that
could be damaged by
direct water contact.
6