T-Fal IS5510 Instructivo De Operación página 9

9100017370 IS5510 Q0-X0_110x154 26/06/14 16:17 Page3
ENVIRONMENTAL PROTECTION FIRST !
i Your appliance contains valuable materials which can be
recovered or recycled.
When disposing of it, take it to a collection point or an
approved service center. To remove the battery, remove the
cover screws on the handle and take the battery out.
Description
1 (A). Steam head hook
1 (B). Clothes hanger hook
2. Telescopic pole
3. Steam head
4. Handle with 'steam
on demand' system *
5. Flexible fabric hose
6. Removable water tank
7. Storage compartment
Garment Steamer Assembly
Pole assembly
1. Insert the telescopic pole into the base and turn the locking ring to secure it into
fig.2
place -
2. Extend the pole to the maximum and tighten the clips -
3. Insert the steam head hook on the top of the telescopic pole -
4. Connect the hose to the base by turning the connector on the end of the hose
fig.2
clockwise -
5. Place the steam head on the hook -
This garment steamer is equipped with a foldable and removable hanger in order
to store the steamer easily.
1. Insert it into the hole on the steam head hook -
2. Press it vertically to tighten it on the hook -
3. Spread out the arms of the hanger -
4. Slide the ring to fix the hanger -
*Depending on the model: these accessories are specific to certain models or available as an option.
8. ON/OFF switch and steam settings
9. Power light indicator
10. Wheels
11. Hose connector
12. Pole connector
13. Fabric Brush
14. Foldable and removable hanger
15. Removable clips *
16. Boiler rinsing cap
fig.4
Foldable and removable
hanger assembly
fig.5
fig.6
fig.7 and 8
fig.9
3
fig.1
fig.3
EN