BEFORE FIRST USE
• Remove all packaging material and check whether the appliance is complete and that all accessories are
included.
• Fully unwind the power cord.
• Let the appliance rest for 24 hrs in upright position.
If any items are damaged or missing, contact your dealer or customer service.
Warning: Plastic bags are a danger to toddlers and babies, therefore keep them away to avoid
suffocation.
INSTALLATION
Warning: This appliance should only be connected to a properly installed wall socket (earthed) and
should not be operated by any means of an external timer or separate remote control system.
Place the appliance on an even, dry and stable surface and close to a properly installed wall socket.
Adhere to a safety distance of at least 50 cm above and around the appliance.
Place the appliance at a suitable area. The room must be bigger than 4m².
OPERATION
The appliance can be operated via the control panel only.
TURNING THE APPLIANCE ON / OFF
-
connect the appliance to a properly installed wall socket and make sure your local voltage matches the
technical data of the appliance.
-
A signal tone sounds and all LEDs light up.
-
Press the ON/STAND-BY (8) button; the device activates the last used mode and the current rel. air
humidity is shown on the display (14).
-
If you use the appliance for the first time it is the Auto (11) mode. The indicator light of the chosen mode
lights up. You can easily turn or move the appliance with the sturdy castor wheels.
-
If the timer has been activated, the device switches off permanently after the time (1-24 hours).
Instruction Manual
ENGLISH
23