ALCIA VideoNET TRANSMITTER Manual De Instrucciones página 4

VideoNET RECEIVER (FIG. 2)
12. On/off switch
13. On/off indicator
14. TV connector cable
15. NET switch
16. NET connector
17. Mixer
18. NET cable
19. NET cable connectors
3. MAINS SPECIFICATIONS
1. The VideoNET uses the existing mains supply to transmit the
audio/video and remote control signal.
2. The VideoNET is designed to work exclusively in biphase system,
therefore, it cannot work in three-phase systems.
3. Should your mains power supply not comply with the required
specifications (three-phase system, interference, etc.), the
VideoNET can use the optional NET 18 cable to transmit the
audio/video and remote control signal, as explained in section 5.
INSTALLING THE OPTIONAL TRANSMISSION NET CABLE.
4. INSTALLATION INSTRUCTIONS (FIG. 3-4-5)
1. Connect the VideoNET TRANSMITTER to the euroconnector of the
picture source (video, satellite receiver, TV, etc.)
connection cable for the picture source 10. Respect the colours of
the audio 4, video 5 connector and the connection cable to the
picture source 10.
1
Although the product can be connected up to several sources, it is
recommended that you connect it up to the video.
-4-
1
by using the