Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

These instructions contain IMPORTANT safety information. Please read and keep for future reference.
The user must read and understand these Instruction Sheets and the Warranty.
Installation is the end user's responsibility and beyond Horizon Global's control. Therefore, Horizon Global exclusively limits its Warranty to
the repair or replacement of a defective product. Damage to your vehicle, your cargo or any person or property is excluded.
Your bike carrier must be inspected for signs of wear, corrosion and fatigue before each use. DO NOT use if bent or deformed.
Make sure your bike carrier is secure before every trip. Check at each stop to ensure your bike carrier is secure.
DO NOT exceed your bike carrier's rated capacity. The capacity is 66lbs (30kg).
Do not attempt to drill, weld, or modify your bike carrier or any of the system components.
This carrier is designed for typical use and applications (on paved or smooth gravel roads). Do not use this carrier on a vehicle that
will be driven on rough roads, or where the carrier (and bikes) will be subjected to significant or constant jarring and/or shock, or any
vehicle with very stiff springs that will transfer the load shocks directly to the carrier and the bikes.
The recommended minimum ground clearance is 14". This may not be sufficient ground clearance depending on the application.
Damage to bicycles or carrier due to ground clearance problems are not covered by warranty.
Bike tires should be at least 6 inches away from exhaust pipe.
DO NOT use your bike carrier for purposes other than those for which it was designed.
DO NOT use this bike carrier in off-road situations.
REDUCE YOUR SPEED. Your vehicle can handle differently when transporting bicycles.
FREQUENTLY check your bike carrier and that the bikes are secure. Bikes can shift or your bike carrier can loosen during travel.
Readjust as needed. If movement continues, stop use.
ALWAYS unload bikes before removing your bike carrier from hitch.
Remove your bike carrier when not in use and before entering automatic car washes.
Check local and state laws governing projection of objects beyond the perimeter of a vehicle.
ALWAYS obey all posted speed limits and be aware of traffic conditions. Adapt your speed to the conditions of the road and the load
being carried.
The proper attachment of this product in accordance with the enclosed instructions is critical to its proper performance. See
instructions for proper attachment, proper usage, and important safety messages. Horizon Global has no control over, or responsibility
for, the attachment or the installation. Horizon Global is NOT responsible nor will it be held liable for any damage resulting from its
attachment or improper use. Horizon Global shall not be liable for any claims of any kind greater than the purchase price of the
product. Warranty information available upon request.
INSTRUCTION GUIDE FOR:
2-BIKE FOLDING CARRIER
63120
Date of Purchase:
WARNING
Review all Warnings, Instructions, and Warranty information carefully.
Failure to follow these warnings and instructions will void the Warranty.
Call Horizon Global Technical Services at (800) 234-6992 or go to
ReeseBrands.com, if you have any questions regarding the use or the limits
of your Bike Carrier. For assistance with this product or to order replacement
parts, please contact Horizon Global, 29000-2 Aurora Road, Solon, OH 44139
Questions? (800) 234-6992 • ReeseBrands.com
PAGE 1
PAGE 1
63120_IN_Rev B • Questions? (800) 234-6992 • ReeseBrands.com
5910200_Rev B • Questions? (800) 239-6992 • RolaProducts.com
/
/

Publicidad

Tabla de contenido
loading

Resumen de contenidos para Reese Explore 63120

  • Página 1 INSTRUCTION GUIDE FOR: 2-BIKE FOLDING CARRIER 63120 Date of Purchase: These instructions contain IMPORTANT safety information. Please read and keep for future reference. WARNING The user must read and understand these Instruction Sheets and the Warranty. Installation is the end user’s responsibility and beyond Horizon Global’s control. Therefore, Horizon Global exclusively limits its Warranty to the repair or replacement of a defective product.
  • Página 2: Parts List

    ASSEMBLY INSTRUCTIONS PARTS LIST PART DESCRIPTION QTY. PART DESCRIPTION QTY. Tubular Section, Top 1/2” Anti-Rattle Pin Tools required for assembly: 5/16” Wrench or Tubular Section, Bottom 1/2” Lock Washer Socket, #2 Philips Screw Driver, 3/4” Wrench Bike Cradle With Straps Clip M6x1 x 14mm Button Head Cap 4mm Allen Wrench...
  • Página 3 ASSEMBLY INSTRUCTIONS LOADING BIKES ONTO THE CARRIER: 1. Load one bike onto the first bike cradle (closest to vehicle) so horizontal seat tube of bike rests on rubber lined bike cradle. Adjust position of bike to find its center of gravity. Secure bike to bike cradle using both hook-n-loop straps on the bike cradle as shown.
  • Página 4 GUIDE D’INSTRUCTION POUR : PORTE-VÉLOS PLIANT 2 PLACES 63120 Date d’achat : Ces instructions contiennent des informations de sécurité IMPORTANTES. Veuillez la lire et la conserver comme référence ultérieure. AVERTISSEMENT L’utilisateur doit lire et assimiler ces pages d’instructions et la garantie.
  • Página 5: Instructions D'assemblage

    INSTRUCTIONS D’ASSEMBLAGE LISTE DE PIÈCES PIÈCE DESCRIPTION QTÉ PIÈCE DESCRIPTION QTÉ Section tubulaire, haut Broche anti-cliquetis de 1/2” Outils nécessaires au montage : Clé à fourche ou Section tubulaire, bas Rondelle de blocage de1/2” à douille de 5/16”, tournevis à pointe Phillips #2, Berceau de vélo avec attaches Clip clé...
  • Página 6 INSTRUCTIONS D’ASSEMBLAGE CHARGEMENT DES VÉLOS SUR LE Porte-vélos: 1. Chargez un vélo sur le premier des berceaux (le plus proche du véhicule) de façon à ce que le tube de selle horizontal du vélo repose sur le rembourrage en caoutchouc du berceau. Ajustez la position du vélo pour trouver son centre de gravité.
  • Página 7: Soporte Plegable Para 2 Bicicletas

    GUÍA DE INSTRUCCIONES DE: SOPORTE PLEGABLE PARA 2 BICICLETAS 63120 Fecha de la compra: Estas instrucciones contienen información de seguridad IMPORTANTE. Léala y consérvela para consultas en el futuro. ADVERTENCIA El usuario debe leer y comprender estas Hojas de instrucciones y la Garantía.
  • Página 8: Lista De Piezas

    INSTRUCCIONES DE MONTAJE LISTA DE PIEZAS PIEZA DESCRIPCIÓN CANT. PIEZA DESCRIPCIÓN CANT. Sección tubular, superior Pasador anti-traqueteo, 1/2” Sección tubular, inferior Arandela de presión, 1/2” Herramientas necesarias para el armado: llave o casquillo de 5/16”, destornillador para Cuna para bicicleta con correas Clip tornillos Phillips N.º...
  • Página 9 INSTRUCCIONES DE MONTAJE CARGA DE LAS BICICLETAS EN EL SOPORTE: 1. Cargue una bicicleta en la primera cuna para bicicleta (la más cercana al vehículo) de manera que el tubo horizontal del asiento de la bicicleta apoye sobre la cuna para bicicleta revestida de caucho.

Tabla de contenido