1. Safety Precaution
Safety Precaution
To prevent the users and others from the harm of the unit, and avoid damage on the unit or
other property, please use the heat pump properly, please read this manual carefully and
understand the following information correctly.
Mark
!
A wrong operation may lead to death or heavy injury on people.
WARNING
!
A wrong operation may lead to harm on people or lose of
ATTENTION
Icon
Prohibition. What is prohibited will be nearby this icon.
!
Compulsory implement. The listed action need to be taken.
ATTENTION(include WARNING)
!
Please pay attention to what is indicated.
1.The hurt means no need to be in hospital and cure for a long time, it' s injury,
burn and get an electric shock.
2.The material lost means property and datum lost.
!
Installation Warning
!
The heat pump must be installed by qualified personals, to avoidimproper
installation which can lead to water leakage, electrical shock or fire.
Professional
installer is required
!
Please make sure that the unit and power connection have good grounding
A wrong operation may lead to harm on people or lose of material.
Grounding is
required
V.2
Meaning
material.
Meaning
3
!
When install the unit in a small room, please take some measures to
prevent the asphyxia caused by the leakage of refrigerant. Please consult
Concentration
the dealer for concreate measures.
Limits
!
The unit Cannot be installed near the flammable gas. Once there is any
leakage of the gas. Fire can be occurred.
Installation
place
!
Make sure the basement of the heat pump is strong enough. To avoid any
decline of fall down of the unit.
Fix the unit
!
Make sure that there is circuit for the unit. Lack of circuit breaker can lead
to electrical shock of fire.
Need circuit
breaker
!
The appliance shall be installed in accordance with national wiring regula-
Wiring
tions.
Connection
!
Make sure that there is leakage protection device. Lack of leakage
protection device can lead to electrical shock, and cause the electrical
Leakage
appliances to burn out or cause a short circuit.
Protection device
!
Make sure that the label with permanent description cannot remove on the
unit shell.
Keep Label
V.2
4