Termozeta MiniRobot100 Libro De Instrucciones página 12

ENGLISH
allow the feeding cable to come
into contact with hot surfaces
and to hang from the resting
surface.
• Make sure the plug is
disconnected from the power
outlet.
• Fit the bowl (4) in the seat (11)
of the appliance body as shown
in figure 1 and 2:
- match the bowl teeth (10) with
the hallows (12) of the
appliance body.
- turn the bowl clockwise until
it is fixed.
WARNING!
Make sure the bowl is correctly
positioned before starting the
appliance.
• Insert the blade unit (3) in
the bowl (4).
• Put the food to be chopped
in the bowl (refer to the food
guide table for the maximum
quantities).
• Fit the lid (1) and make sure
that the blade support (8)
ent ers th e hol e (9); pay
special attention to the tongue
(2), which must be positioned
as shown in figure 3.
Fig. 1
10
12
Fig. 2
Fig. 3
2