Operating Instructions - LF Idylis I HUM 10 140 Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

OPERATING INSTRUCTIONS

1. Turn the unit on by pressing the POWER button.
Turn the unit off by pressing the button for 2 seconds
again.
2. Set fan level by pressing the FAN SPEED
button. The speeds progress Low, Medium,
and High. Pressing the FAN SPEED
button again will reset it to Low.
3. Press the HUMIDITY button once for the knob
to pop out for adjustment. Rotate the HUMIDITY
knob clockwise (toward the Plus symbol) to increase
the humidity level and counterclockwise (toward the
Minus symbol) to reduce humidity level.
Press button in again as desired.
4. Press the LIGHTS ON/OFF (Night Mode) button to
turn off all lights on the control panel while leaving all
the settings the same. Touching any of the controls
will reilluminate the panel.
5. ADD WATER icon illuminates when the water supply
needs to be replenished. Follow instructions in the
Assembly Instructions.
6. The CHANGE FILTER icon will illuminate when
the fi lter (wick) has become too dirty to operate
correctly or after 720 hours of use.
NOTE: The CHANGE FILTER icon will automatically
reset after fi lter is changed.
1
2
3
4
5
6
www. lowes.com
10

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

0484759

Tabla de contenido