Towing Products 81990 Instrucciones De Instalación

August 2008
Rev. 1
APPLICATION:
WARNING: Although this hitch is designed to safely tow its rated load, we recommend that you consult your vehicle owner's manual for possible
manufacturer's recommendations or limitations. Trailer brakes are recommended for towing loads in excess of 1500 lbs. Always follow the manufacturer's
installation instructions and always install on the specified vehicle. Before installing hitch, check that the attachment points are in good condition.
Failure to follow these guidelines will void warranty. Any modifications to this hitch will void warranty.
WARNING: Use only a 5/8" diameter hitch pin with locking device to secure a ball mount in this receiver. Be sure to check the hitch pin and hair pin
for positive locking placement before towing trailer.
NOTE: Some states require a clear view of license plates. Remove trailer ball and/or ball mount when not in use if it restricts view.
COMPLETE PARTS LIST
Item Part # Description
1. 8199-11 Receiver Assembly
HARDWARE KIT #4371-05
2. 3698-04 14mm x 2.0 x 45 mm Hex Bolt
3. 2668-01 1/2-13 x 1-1/4 Carriage Bolt
4. 4342-08 Square Hole Plate
5. 1092-03 9/16 Flatwasher
6. 3701-05 9/16 Lockwasher
7. 1828-03 1/2-13 Flange Locknut
8. 3730-05 1/2 Conical Washer
CLASS V
WEIGHT CARRYING HITCH CAPACITY
6,000 LBS. MAXIMUM TRAILER WEIGHT
600 LBS. MAXIMUM TONGUE WEIGHT
WEIGHT DISTRIBUTING HITCH CAPACITY
10,000 LBS. MAXIMUM TRAILER WEIGHT
1,000 LBS. MAXIMUM TONGUE WEIGHT
INSTALLATION INSTRUCTIONS
MODEL NO. 81990
2000-06 Chevrolet Suburban, Tahoe XL & Tahoe (ext. with canister on Rt frame)
2000-06 GMC Yukon XL & Yukon (ex. with canister on Rt frame)
2002-06 Chevrolet Avalanche Z66
Quantity
1
2
2
2
2
2
2
2
78201
Hardware Kit #4371-05