Kenmore 01898 Manual De Uso Y Cuidado página 7

7．Detach the regulator with wrench (Part PP), and replace with the NG hose.
8．Remove the 5 main burner control knobs and the side burner control knob. Do not remove the rotisserie burner
knob. Install the M4 locking screws (Part OO, 5 pcs) into the correct hole as shown in the inset. Replace the
knobs with the new knobs from the kit when finished. Paste the new rating label (part TT) for NG under the
original rating label for LPG at the cart door inner panel.
Note: Before NG conversion, the control valve can be turned ¾ of a turn, or 270 degrees. The knob reads "LO"
when turned all the way counterclockwise 270 degrees. After conversion to NG, the control valve can only be
turned ½ a turn, or 180 degrees. The NG knob should read "LO" when turned all the way counterclockwise 180
degrees. If the installed knob does not read "LO" when turned all the way counterclockwise, the wrong knob is
installed
7
7