Part Identification - Grunkel HV-16 CRISTAL Manual De Instrucciones

1
2
- Read the important safeguards and Caution.
- Fill kettle up to the MAX WATER MARK and let the water boil, pour the water, cool the kettle and repeat for
at least 3 times before using.
1. Fill the kettle with water. Do not overfill. Use the water level indicator.
2. Place the kettle on the base.
3. Electrical connection:
 Check whether the electrical voltage which you intend to use is the same as that of the kettle.
Details can be found on the label at the base of the kettle.
 Only connect the kettle to a properly installed 230V, 50Hz socket.
4. Switch the kettle to position "I". The control lamp on the water indicator shows that the water is
being boiled.
5. After boiling. The kettle switches off automatically.
Disconnect the kettle from the mains supply.
Do not press up the lid when pouring.
6. This appliance is intended to be used in household and similar applications such as:
Staff kitchen areas in shops. Offices and other working environments.

 Farm houses.
 By clients in hotels, motels and other residential type environments.
 Bed and breakfast type environments.
Always remove the plug from the mains supply before cleaning the kettle.

The exterior of the kettle should be cleaned, if necessary, with a slightly damp cloth

without additives.
The calcium filter can be removed for cleaning.

WARNING: You should not dispose of this device with your household waste. A selective collection
system for this type of product is implemented by your local authorities. Please contact your local
authorities to find out how and where collection takes place. These restrictions apply

PART IDENTIFICATION

Ⅲ.
4
Parts:
1. Power cord.
5
2. Base
3. On/off switch
4. Safety lock for water container lid
3
5. Water container
Ⅳ. BEFORE USING
HOW TO USE
Ⅴ.
CLEANING
Ⅵ.
www.grunkel.com
11