Installation; Wall Mount; Eave Mount - Desa JourneyMan Serie Manual Del Usuario

Installation

CAUTION: BEFORE STARTING THE INSTALLATION, TURN THE POWER OFF AT THE
If you want to use the Manual Override feature you will need to install the fixture on a circuit controlled
by a switch.

Wall Mount

❒
Loosen the thumbscrews holding the sensor
head and lampheads.
❒
Adjust the various parts so that the fixture
looks similar to this illustration.
❒
Finger tighten the thumbscrews at this time.
598-1118-04
CIRCUIT BREAKER.
❒
Loosen the thumbscrews holding the sensor
head and lampheads.
❒
Adjust the various parts so that the fixture
looks similar to this illustration.
❒
Finger tighten the thumbscrews at this time.
-5-

Eave Mount