Symmons 229-TP Manual De Funcionamiento Y Mantenimiento página 2

Installation
1) Place mounting bracket (D) into
desired position and mark drill
hole locations. Drill two 5/16"
(8 mm) holes into wall.
2) Insert two toggle anchors (E) into
drill holes.
E
E
E
F
*Note: For plaster walls 1/2" thick
or less, insert toggle tool (F) into
toggle anchors (E) to secure behind
wall prior to installing trim.
Problem
Finish is spotting
Symmons Industries, Inc.
Copyright © 2019 Symmons Industries, Inc.
3) Reposition mounting bracket (D)
on toggle anchors (E) and secure
to wall using two screws (C).
D
C
C
4) Attach escutcheon (B) to mounting
bracket (D).
B
Elements in water supply may cause
water staining on finish.
■ ■
31 Brooks Drive
■
symmons.com
E
D
E
D
Cause
■
Braintree, MA 02184 Phone: (800) 796-6667
■
gethelp@symmons.com
5) Attach toilet paper holder arm (A)
to mounting bracket (D) so arm
sits flush with escutcheon (B).
A
6) Secure toilet paper holder arm (A)
to escutcheon (B) and mounting
bracket (D) with set screws (G).
D
A
G
Solution
Clean finished trim area with a soft
cloth using mild soap and water or a
non-abrasive cleaner and then quickly
rinse with water.
■
Fax: (800) 961-9621
■ ■
ZV-3192 REV C 071719
B
D
B
1