Utilitech Pro WL160208 Manual Del Usuario página 4

SAFETY INFORMATION
BE EXTREMELY CAREFULLY WHEN USING THIS DEVICE. Improper use of this work light can
result in injury or death. Follow all safeguards stated in this manual in addition to normal safety
precautions in working with electrical devices. DO NOT attempt to service this device.
- When using outdoor portable work lights, always follow basic safety precautions to reduce the risk
of electric shock and personal injury.
- Failure to observe the following safety rules may result in FIRE, ELECTRICAL SHOCK, INJURY, or
EXPOSURE TO EXCESSIVE ULTRAVIOLET RADIATION.
- Use only 3-wire UL Listed outdoor extension cords that have 3-prong grounded plugs and grounded
receptacles that accept the work light's plug.
- Use only with an extension cord for outdoor use, such as with cord type SW, SW-A, SOW, SOW-A,
STW, STW-A, STOW, STOW-A, SJOW, SJOW-A, SJTW, SJTW-A, SJTOW, or SJTOW-A.
- This product contains chemicals, including lead, known to the state of California to cause birth
defects and other reproductive harm. Wash hands after handling or touching this portable work light.
- To avoid electrical shock, do not use near water or in areas where water may accumulate. Keep
work light at least 16 ft. from pools or spas. Keep plugs dry. Use only Ground Fault Circuit
Interrupter (GFCI) protected receptacles when using this work light in wet or damp locations.
Receptacles are available with built-in GFCI protection and are to be used for this measure of
safety.
- Always unplug work light and allow lamp head to cool.
- To avoid burns, do not touch the lens or metal part of the lamp head while lamp is turned on.
- Do not look directly at the lighted lamps to avoid eye injuries.
- Always keep the work light away from any flammable surfaces or materials.
- Do not operate work light if it has a missing or damaged lens cover. Contact customer service for a
replacement. Read and follow all safety rules and operating instructions before first use of this
product.
PREPARATION
Before beginning assembly of the product, make sure all parts are present. Compare parts with
package contents and hardware contents list. If any part is missing or damaged, do not attempt to
assemble the product.
Estimated Assembly Time: 30 seconds
No tools required for assembly.
4