GEA AEH10 Manual Del Propietario Y Instrucciones De Instalación página 12

Installation Instructions
INSTALL SUPPORT BRACKET AND
7.
FOAM TOP WINDOW GASKET
A.
To prevent broken
glass or damage to
windows, on vinyl or
other similarly
constructed windows,
attach the window
locking bracket to the
window side jamb with
one Type B screw.
B. Cut the foam top window gasket to the
window width.
C. Stuff the foam
between the glass
and the window
to prevent air
and insects from
getting into the
room.
NOTE: If the gasket supplied does not fit your
window, obtain appropriate material locally to
provide a proper installation seal.
12
Vinyl
Wood
8.
Additional insulation is provided with your
window air conditioner to reduce heat
leakage into the home, reducing overall
energy usage.
A. After the air conditioner is installed in the
window measure the length of the accordion
for both sides.
B. Cut the foam insulation to the measured
length of the left and right side accordion.
NOTE: Be sure to measure each accordion
because the length could be different on
each side.
C. Remove adhesive from back of foam
insulation. Stick the foam insulation onto
the left and right accordion, and inside of the
frames.
NOTE: be careful to cover the entire
accordion.
49-7809