Bigben Interactive RR30 Manual De Instrucciones página 10

•
Press "ALARM/SET" once. Display will be blink and show ALARM 1, press HOUR and MIN for your
desired wake up time. Press BAND/MODE once to select the icon "ON" wake up by radio, or select the icon
"BUZZ" wake up by buzz sound.
•
Then press "ALARM/SET" once to confirm. Please note "ALARM 1" is displayed and ready to set
"ALARM 2" now.
•
To set "ALARM 2", press HOUR and MIN for your desired wake up time. Press BAND/MODE once to
select the icon "ON" wake up by radio, or select the icon "BUZZ" wake up by buzz sound.
•
Now display show ALARM 1 + ALARM 2 is activated.
Checking alarm time
Press "ALARM/SET" once. ALARM 1 time is display, or ALARM 1 + ALARM 2 is display.
Selecting alarm options
The alarm will not sound when the clock radio is disconnected from AC power and powered by the backup battery only.
Waking up to a buzzer alarm
5. Press "ALARM/SET" once, make sure ALARM 1 or ALARM 2 with icon BUZZ is indicated, it will be wake up
by Buzz sound.
6. Set the alarm time. Refer to "setting alarm time" for details.
The alarm buzzer will sound at the real alarm time.
Waking up to radio
1. Press "ALARM/SET" once, make sure ALARM 1 or ALARM 2 with icon "ON" is indicated, it will be wake up
by radio.
2. Set the alarm time. Refer to "setting alarm time" for details.
The alarm buzzer will sound at the real alarm time.
Stopping an alarm
Press ALARM SLEEP / OFF to stop the buzzer, or radio alarm. The alarm will sound again the next day at the preset
alarm time.
Deactivating alarms
Press "ALARM/SET" once, ALARM 1 is display, press BAND/MODE once to select the icon "OFF" as to cancel the
alarm set. To cancel ALARM 2 are same procedure as ALARM 1.
Snooze
When the alarm sounds at the preset time, press SNOOZE to enter snooze mode. The alarm will sound again after 10
minutes.
Sleep to radio
Using the sleep timer
The purpose of the sleep timer is to turn the radio off automatically if you tend to fall asleep at night with
the radio on.
To use the sleep timer:
1.
Press SLEEP once "120" minutes and the SLEEP icon appear on the display. If the radio is off, it turns on
automatically.
2.
Press SLEEP once to adjust the sleep minutes as you want the time left.
10