How to Use
1. Read "Chopping Tips."
2. Make sure chopper is unplugged. Lock bowl onto base by
aligning tabs on bowl with slots in base. Turn clockwise.
3. Place blade in bowl over center shaft. Turn until blade
slips down to bottom of bowl. Blade is sharp; handle
carefully.
4. Place food in bowl.
5. Place cover on bowl.
6. Plug into electrical outlet.
7. To turn unit on, turn cover to ON ( I )
position. For continuous operation,
the cover must be held in the ON ( I )
position. See illustration.
8. To turn unit off, turn cover counter-
clockwise to OFF ( O ) position.
Do not remove cover until blade
has stopped turning.
9. Remove cover. Unlock bowl by turn-
ing counterclockwise. Remove bowl from base. Carefully
remove blade. Blade is sharp; handle carefully.
10. Unplug unit from outlet when not in use.
IF CHOPPER DOES NOT START : Review the steps in
"How to Use" to make sure the bowl and cover are both
in the locked positions.
4