Charging With Usb; How To Install A Microsd Card - LG Samba Manual De Propietario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Getting Started with Your Phone
2. Gently uncover the phone's
accessory/ charging port.
Then plug the end of the AC
adapter into the accessory/
charger port and the other
end into an electrical outlet.
3. The charge time varies
depending upon the battery
level.

Charging with USB

You can use your computer to
charge your phone. To be able
to charge with the USB cable;
you may need to have the
necessary USB Driver installed on
your PC first. Connect one end
of the USB cable to the charging
accessory port on your phone
and the other end to a bus-
powered USB port on your PC.
30
Notice
Please make sure that the 'B' side is
facing up before inserting a charger
or data cable into the charger port of
your phone.
Note
Low-powered USB ports are not
supported, such as the USB port on
your keyboard or bus-powered USB
hub.
How to Install a microSD
Card
1. Remove the back cover and
locate the microSD
the left side.
microSD
TM
Slot
slot on

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido