Product Diagram; Adding Water; How To Use - TaoTronics TT-AD006 Guia Del Usuario

Product Diagram

⑴ Mist Outlet
⑵ Tank Cover
⑶ Light Button
⑷ Mist Button
⑸ Tank Lid
⑹ Drain Side
⑺ Max Water Level Line
⑻ Air Outlet
⑼ Water Tank
⑽ Base
⑴
⑵
⑶
MIST COLOR ⑷
⑸
⑻
AIR OUTLET
EMPTY RROM
THIS SIDE
—— max
⑼
⑽
⑾ Air Inlet
⑿ DC Socket
⒀ Water Outlet

Adding Water

• Remove the tank cover and the tank lid.
• Add up to 100 mL / 3.4 oz water (below 40°C / 104°F) into the water tank.
• Add 1 – 2 drops (0.05 – 0.1 mL) of essential oil into the water.
• Put the tank cover and the tank lid back on.

How to Use

⑹
Connect the power adapter (you will hear a beep sound). The diffuser is now in
⑺
standby status. Make sure there is enough water inside the tank. Use the Mist
Button (on the left) to turn on / off the misting and adjust between continuous /
interval misting mode. Use the Light Button (on the right) to control the lighting
mode and the color of the light.
Mist Button (Left Button)
Press the Mist Button to activate continuous misting mode (you will hear a beep
sound). The unit will stay on until all water has been depleted. Press again to
activate interval misting mode (you will hear two beeps), where the misting will
turn on and off for 30 seconds in a cycle until all water has been depleted. One
nal press will shut off the unit.
⑿
⑾
⒀
03/04