Siemens FDT241 Manual De Instrucciones página 6

EN
Declaration of performance No 0786-CPR-20004
EN 54-5:2000 + A1:2002
Essential characteristics
Monitoring of removable detectors
Manufacturer adjustments
Setting of response behaviour on site
Labelling
Technical manual
Additional requirements for software-controlled detectors
Supply voltage tolerance
Fluctuations in supply parameters
Stability of operational reliability, temperature resistance
Cold (during operation)
Dry heat (endurance test)
Stability of operational reliability, vibration resistance
Impact (during operation)
Blow (during operation)
Oscillation, sinusoidal (during operation)
Oscillation, sinusoidal (endurance test)
Stability of operational reliability, moisture resistance
Humid heat, cyclical (during operation)
Humid heat, constant (endurance test)
Stability of operational reliability, corrosion resistance
Sulphur dioxide (SO ) corrosion (endurance test)
2
Stability of operational reliability, electrical stability
Electromagnetic compatibility (EMC), interference immunity
tests (during operation)
EN 54-17:2005 + AC:2007
Essential characteristics
Performance in the event of fire
Manufacturing tolerance
Operational reliability
Requirements
Stability of operational reliability, temperature resistance
Dry heat (during operation)
Cold (during operation)
Stability of operational reliability, vibration resistance
Impact (during operation)
Blow (during operation)
Oscillation, sinusoidal (during operation)
Oscillation, sinusoidal (endurance test)
Stability of operational reliability, air humidity resistance
Humid heat, cyclical (during operation)
Humid heat, constant (endurance test)
Stability of operational reliability, corrosion resistance
Sulphur dioxide (SO ) corrosion (endurance test)
2
Stability of operational reliability, electrical stability
Fluctuations in supply voltage
Electromagnetic compatibility (EMC), interference immunity
tests (during operation)
The performance of the product identified above is in conformity with the set of declared performance/s. This
declaration of performance is issued, in accordance with Regulation (EU) No 305/2011, under the sole respons-
ibility of the manufacturer identified above.
6 / 70 6 / 70
Siemens Schweiz AG
Section Performance
4.6 Passed
4.7 Passed
4.8 Passed
4.9 Passed
4.10 Passed
4.11 Passed
5.7 Passed
5.9 Passed
5.10 NPD
5.14 Passed
5.15 Passed
5.16 Passed
5.17 Passed
5.11 Passed
5.12 Passed
5.13 Passed
5.18 Passed
Section Performance
5.2 Passed
4 Passed
5.4 Passed
5.5 Passed
5.9 Passed
5.10 Passed
5.11 Passed
5.12 Passed
5.6 Passed
5.7 Passed
5.8 Passed
5.3 Passed
5.13 Passed
V04