XD P326.911 Manual De Instrucciones página 5

C. About the rechargeable Lithium Battery
This Bluetooth Speaker has an internal, non–user-replaceable battery. For best results, the first time you
use this Bluetooth Speaker, let it charge for about 2 ~ 3 hours or until the "Charge LED (6)" light to off
from On which show you the battery is fully charged.
For maintain the battery life and performance, if speaker isn't used for a while, the battery might need to
be recharged. Charge the battery at least once every month.
To recharge the built-in battery:
• Connect the Bluetooth Speaker's "Micro USB socket (7)" with the Computer's USB port through USB
cable.
• The "Charge LED (6)" light will turn On in red, the battery is in charging.
• The "Charge LED (6)" light will turn Off when the rechargeable battery is fully charged.
• Disconnect the USB cable when it is done.
D. Power ON and Pairing
1. Long press the " (1)" button to turn On the device, a series of tones will sound and the "Mode LED
(12)" will light and slow blinking in blue for 20 ~ 22 seconds, Bluetooth Speaker is in reconnect mode to
searching previous paired device if it in operation and in connection range;
2. If no device found, the "Mode LED (12)" will turn to fast blinking in blue and new series of tones will
sound again for remind, now the Bluetooth Speaker is turn to new paring mode for new device pair;
3. Then activate the Bluetooth function in your mobile device (such as Mobile Phone or Personal Com-
puter), the device will enter to Bluetooth searching mode automatically, if not, tap the relate selection to
manually enter to searching mode. (refer to your device's manual when necessary)
4. Your mobile device should show "TWIN SPEAKER" in list, and then select it for pairing. Waiting for
some seconds and you will see connected message as shown on your mobile device. (For some Bluetooth
devices, you may need to input "0000" as pairing password)
5. If pairing is successful, a series of tones will sound and the "Mode LED (12)" light will switch to slow
blinking from fast. (about 4s once)
6. Now, you can start to music play from the mobile device by it music player program.
7. Long press the " (1)" button to turn Off the device when it is not in use.
Note: for saving battery energy, the Bluetooth Speaker will turn to off mode automatically when no device
is in paired in 8 minutes. Turn On the device by long press the " (1)" button to turn On the device if you
want.
E. Disconnect from paired device
1. To disconnect with paired device, for better result turn Off the Bluetooth Speaker directly.
2. Or, you can choose "Disconnect" from Bluetooth paired device list on your mobile device.
3. In this case; the Bluetooth Speaker will turn back into "Searching / Pairing" mode in seconds, a series of
tones will sound and the "Mode LED (12)" light will turn back to fast blinking from slow in blue.
4. Now, you can process for new mobile device pair or power Off the Bluetooth Speaker as you wanted.
5
Manual_P326.911_Wireless_Double_Speaker.indd 5 6-10-2016 10:25:38