•
The headset stops working if it gets too far away from the
computer – for example, if you move more than 30 meters
(100 feet) away from your computer without taking your
headset off. If this happens, the headset goes into Idle
mode, and the Pairing LED flashes blue intermittently. If
you come back in range within three minutes, the headset
automatically becomes paired with the computer again.
If you don't come back within range within three minutes,
the headset goes into Sleep mode. To restart pairing, turn
the headset off and then on again with the On/Off button.
Pairing should take place within 10 seconds.
Pairing LED Status
Explanation
Red/blue alternate
Searching for a device,
flashing
attempting to pair, or pairing
Blue flashing
Paired. After 10 seconds, the LED
turns off.
Intermittent blue
Idle (not paired) or attempting to pair
flashing
with most recently paired device.
After three minutes, headset goes
into Sleep mode and LED turns off.
Intermittent red
Low battery
flashing
No indication
Paired or in Sleep mode.
16