VITO PRO-POWER SAQ - 2000W PLUS Manual De Instrucciones página 8

EN
ATTENTION: Read the safety
instructions. Failure to follow
the safe ty instructions may result
in electrical shock, fire or serious
injury. Keep these instructions.
Keep your work area clean and tidy.
Locations worked poorly lit and
unorganized can cause accidents.
Do not operate this tool in places
with risk of explosion (which are
liquids, gases or dust).
Power tools create sparks which
may result in fire.
Keep children and bystanders away
while operating power tools.
Distractions can result in accidents.
The plug from the tool should not be
modified or used in conjunction with
any adapters.
Prevent body contact with grounded
surfaces.
The machine must not be used
in wet environments or under rain.
Water entering the machine can
cause electric shock.
The machine must not be
transported by the power plug.
Keep away from local extension with
oil, sharp edges and moving parts.
Damaged cords increase the risk
of accidents.
Do not operate the machine while
under the influence of alcohol,
drugs or is tired.
Use additional protective equipment
such as goggles, gloves, dust mask,
safety shoes and helmet headset
security.
Ensure that the switch is in the
position before connecting the
machine to the mains.
8
Use appropriate clothing. Loose
clothes, jewelry, gloves and loose
hair can be caught in moving parts.
Do not use the machine if the switch
is not functional.
Remove the plug from the socket
before carrying out any repairs.
Store the machine in a safe place
and away from children whenever
it is not being used.
BEFORE EACH USE,
PLEASE NOTE
In case of any damage, take it to
an authorized service center VITO.
Inspect the cord and the plug.
If damaged should be repaired
immediately. This machine should
not be used by minors.
DURING USE PAY
ATTENTION
Do not touch the air outlet. Risk of
burning due to high temperatures.
Do not place too close to the output
of the object to work.
No direct the air flow for a long
time for the work surface.
Do not direct the airflow directly to
you or anyone who is close to you.
Never use this machine to dry hair.
Do not leave the machine near
flammable products.
Do not use or direct the air flow
to flammable materials.
For your security, you should have
beside him a bucket of water or fire
extinguisher.
Keep the cord away from the air
outlet.
Make sure that the workplace
is ventilated.
To switch the tool off,
press the Cool-off Shot Button
to set the tool at the lowest air
temperature and Max. air flow
to cool off.
Then set the "ON/OFF"
switch to position "0".
Let the tool cool down before
moving or storing it.
AFTER USE,
PLEASE NOTE
- Turn the machine off and remove
the plug.
- Allow machine to cool
for a few minutes before storing.
Store the machine in a cool, dry
place away from children.
APPLICATIONS
- Removal of paint or varnish;
- Removal synthetic products;
- Removing stickers;
- Removing tiles;
- Removal veneers.
- Softening / melting plastic.
- Welding of plastic pipes (water);
- Fusing;
- Thawing water pipes;
- Thawing locks;
- Modeling plastic tubes.