Microwave Cooking - Nbels MCM 20 FI W Manual De Instrucciones

1. CLOCK
The oven has a 24-hour digital clock,
To input the time, for example to 16:30:
a) Press "Clock/Timer",the display will flash,adjust the hour with knob"Time /Weight Setting"
b) Press "Clock/Timer" again, adjust the minute with knob"Time /Weight Setting".
c) Press "Clock/Timer" again and the clock will be set.
d) If you want to change the time, repeat above procedure.
2. TIMER
This allows you to set the microwave oven start and finish cooking at pre-set time.
The clock must be set before you use this feature.
Example:The current time is 16:30 and you want to start cooking at 18:15 on P70 power for 10minutes:
a) Press "Clock/Timer", set the time to "18:15" by rotating knob"Time /Weight Setting".
(same procedure as setting clock)
b) Press "Micro/Defrost " to select P70 power.
c) Set cooking time for 10 minutes.
d) Press "Start/Reset"
If you do not set the power and cooking time and directly press the start button once you have programmed
the time, the appliance will only work as a clock.
At 18:15 there will be 10 bleeps and the appliance will be switched off.
3. SIMPLE COOKING
You only need press " Start/Reset" to start cooking for 1 min with P100 microwave power.
Each press means increasing one minute cooking time, the maximum time is 30 min.
finished you will sound five beeps for remind.

4. MICROWAVE COOKING

(A) Fast cooking method
(For example: Select P100 power to cook foods for 5 minutes.)
a) Rotate the knob"Time /Weight Setting" to set time "5:00"
b) Press "Start/Reset" button.
(B) Control by hand
(For example: Select P70 power to cook foods for 10 minutes)
a) Press "Micro/Defrost" button to select P70 power.
b) Rotate time knob to set cooking time "10:00" .
c) Press "Start/Reset" button.
You can press "Micro/Defrost" button to select power.
Microwave power have 5 settings,and it's P100、 P70、 P50、 P30 and P10 from high to low power.
,
Press and hold the "Start/Reset" for 2 seconds to stop.
18
After cooking