Sauder Pinwheel Collection 421889 Manual Del Instrucciones página 13

Step 9
Carefully turn your unit over onto its front edges. Lay the SMALL
å
BACK (H) over your unit.
Turn seven WHITE 7/16" LARGE HEAD SCREWS (89S) through the top
å
edge of the SMALL BACK (H) and into the BACK (F). Do not completely
tighten the SCREWS at this time.
Make equal margins along the side and bottom edges of the BACK (H).
å
Fasten the SMALL BACK to your unit using the NAILS (5N).
Now, completely tighten the SCREWS in the top edge of the
å
SMALL BACK (H).
Push the PLASTIC FOOT (20E) into the hole in the BOTTOM (D).
å
NAIL
(15 used in this step)
www.sauder.com/services
5N
H
D
20E
Caution
Do not stand the unit upright without the
BACK fastened. The unit may collapse.
WHITE 7/16" LARGE HEAD SCREW
(7 used in this step)
421889
89S
F
Page 13