Página 1
Model 423033 NOTE: THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. Need help? Visit Sauder.com to view video assembly tips or chat with a live rep. PLEASE READ AND KEEP FOR FUTURE REFERENCE. Prefer the phone? Call 1-800-523-3987. English pg 1-18 Français pg 19-21...
Página 2
LARGE BACK (1) SHELF MOLDING (3) LOWER RIGHT END (1) BACK (1) SKIRT (1) LOWER LEFT END (1) ADJUSTABLE SHELF (3) LOWER END MOLDING (2) TOP (1) END MOLDING (2) BOTTOM (1) M25 TOP MOLDING (1) Page 2 423033 www.sauder.com/services...
Página 3
Now you know Part Identifi cation our ABCs. www.sauder.com/services 423033 Page 3...
Página 4
NAIL - 55 HOLE PLUG - 3 METAL PIN - 12 CAM COVER - 8 BLACK 9/16" LARGE HEAD SCREW - 17 BLACK 1-1/8" PAN HEAD SCREW - 3 113S BLACK 1-15/16" FLAT HEAD SCREW - 4 Page 4 423033 www.sauder.com/services...
Página 5
Then, insert the metal end of a CAM DOWELS (2F) into the HIDDEN CAMS. Do not tighten the HIDDEN CAMS in this step. Arrow (12 used) Arrow Insert the metal end of the CAM DOWEL into the HIDDEN CAM. www.sauder.com/services 423033 Page 5...
Página 6
å BLACK 9/16" LARGE HEAD SCREW (1S). Remember: Righty tighty. NOTE: Position the SAFETY STRAP (60M) exactly as shown. å Lefty loosey. Long fi nished edge BLACK 9/16" LARGE HEAD SCREW (1 used in this step) Page 6 423033 www.sauder.com/services...
Página 7
Tighten Risk of damage or Arrow injury. HIDDEN CAMS must be completely Maximum Arrow tightened. HIDDEN 210 degrees CAMS that are not completely tightened may loosen, and parts may separate. To Minimum completely tighten: 190 degrees www.sauder.com/services 423033 Page 7...
Página 8
(3 used in this step) Notched edge Curved edge Slide the END MOLDINGS (K) onto the notched edges. Notched edge The large groove is closer to this edge. The large groove is closer to this edge. Page 8 423033 www.sauder.com/services...
Página 9
Don't worry. It isn't Rome. This can be built in a day. Long fi nished edge S u r f a c i t h h o l 113S BLACK 1-15/16" FLAT HEAD SCREW (4 used in this step) www.sauder.com/services 423033 Page 9...
Página 10
Notched edge i t h f a c S u r D E N H I D These holes must be here. S u r f a c H I D D E N i t h Page 10 423033 www.sauder.com/services...
Página 11
Notched edge i t h o f a c S u r D E N H I D The large groove is closer to this edge. The large groove is closer to this edge. www.sauder.com/services 423033 Page 11...
Página 12
Fasten the BASE (M48) to the LOWER ENDS (C and D) and BOTTOM (F). å Use fi ve BLACK 9/16" LARGE HEAD SCREWS (1S). BLACK 9/16" LARGE HEAD SCREW (10 used in this step) Wide edge Page 12 423033 www.sauder.com/services...
Página 13
NOTE: There are no pre-drilled holes in the SKIRT. The å SCREWS will tighten into the groove. Carefully turn your unit over onto its front edges. å BLACK 9/16" LARGE HEAD SCREW (6 used in this step) www.sauder.com/services 423033 Page 13...
Página 14
(55 used in this step) through the hole. 1/2" Do not fasten NAILS along this edge until the BACK (I) is overlapping the LARGE BACK (H2). 1-1/2" 5-1/2" 1/4" The BACK (I) overlaps the LARGE BACK (H2). Page 14 423033 www.sauder.com/services...
Página 15
NOTE: Before moving your unit to a diff erent location, unscrew the SAFETY DRYWALL ANCHOR (61M) from your wall. The nylon sheath will remain behind your wall. Pro Tip: Lift with your legs. And, you know, your arms. www.sauder.com/services 423033 Page 15...
Página 16
Repeat this step for the other ADJUSTABLE SHELVES (J). å * U.S. Patent No. 5,499,886 å Notched edge Slide the SHELF MOLDING (N) onto the notched edge. These surfaces should be even. The large groove is closer to this edge. Page 16 423033 www.sauder.com/services...
Página 17
Insert the METAL PINS (1R) into the hole locations of your å choice in the ENDS (A2 and B2) and LOWER ENDS (C and D). Set the ADJUSTABLE SHELVES (J) onto the METAL PINS. (12 used) www.sauder.com/services 423033 Page 17...
Página 18
This completes assembly. Clean with your favorite furniture polish or a damp cloth. Wipe dry. å And to celebrate, why not share your success story? No load 30 lbs. (8 used) 30 lbs. To cover HIDDEN CAMS 40 lbs. 30 lbs. 50 lbs. Page 18 423033 www.sauder.com/services...
Página 19
Modèle 423033 Bibliothèque avec 5 Tablettes Utilisez les instructions d’ a ssemblage en français avec les NOUS SOMMES LA POUR VOUS AIDER! schémas étape par étape du manuel d’instruction en anglais. Nous faisons de notre mieux pour nous assurer que votre meuble Chaque étape en français correspond à...
Página 20
Enfi ler les MOULURES D’EXTRÉMITÉ* (K) sur les chants crantés des EXTRÉMITÉS (A2 et B2). * Brevet État Unis n° 5,499,886 ÉTAPE 5 Fixer la TABLETTE (G2) aux EXTRÉMITÉS (A2 et B2). Utiliser quatre VIS NOIRES TÊTE PLATE 49 mm (113S). Page 20 423033 www.sauder.com/services...
Página 21
5. Continuer de tourner jusqu’à ce que la vis commence à pivoter librement. REMARQUE : Avant de déplacer l’unité vers un emplacement diff érent, dévisser le DISPOSITIF DE SÉCURITÉ POUR PLACOPLÂTRE (61M) du mur. La gaine en nylon restera derrière le mur. www.sauder.com/services 423033 Page 21...
Página 22
Modelo 423033 Librería con 5 Estantes Use estas instrucciones de ensamblaje en español junto con las ESTAMOS AQUI PARA AYUDAR! fi guras paso-a-paso provistas en el folleto inglés. Cada paso Tratamos de asegurar que su mueble llega en condición excelente.
Página 23
EXTREMOS (A2 y B2). bordes delanteros. *Patente EE. UU. No. 5,499,886 PASO 5 Fije el ESTANTE (G2) a los EXTREMOS (A2 y B2). Utilice cuatro TORNILLOS NEGROS DE CABEZA PERDIDA de 49 mm (113S). www.sauder.com/services 423033 Page 23...
Página 24
5. Continúe girando hasta que el tornillo comience a rotar libremente. NOTA: Antes de trasladar la unidad a otra ubicación, desatornille el ANCLAJE DE SEGURIDAD PARA EL DRYWALL (61M) de su pared. La cubierta de nailon permanecerá detrás de su pared. Page 24 423033 www.sauder.com/services...
Página 25
Les téléviseurs peuvent être un téléviseur. cet eff et. particulièrement lourds. De plus, le poids et l’emplacement du tube image ont tendance à rendre les téléviseurs instables et enclins à tomber vers l’ a vant. www.sauder.com/services 423033 Page 25...
Página 26
Además, el peso y la ubicación del tubo de imagen tienden a causar la inestabilidad de televisores y propensa a volcarse hacia adelante. Page 26 423033 www.sauder.com/services...
Página 27
à compter de la date d'achat la première fois et qui sont signalés à Sauder dans les limites de couverture de la contre tout défaut de matériaux ou de fabrication des composantes de mobilier Sauder.
Página 28
Dear Valued Customer: So, how did it go? Thanks so much for choosing Sauder® furniture. I hope the Set a world record for speed? purchase and assembly process was a positive experience Feeling good about yourself? and you feel good about the furniture you just built. If you Nice.