Operation; Selecting The Audio Source; Setting The Display Brightness; Setting The Volume - Medion LIFE S61388 Manual De Instrucciones

If you have connected the soundbar to a Bluetooth device that supports
the A2DP and AVRCP profiles (Audio Video Remote Control), the
soundbar is used as an output medium and the audio signals are only
output through the soundbar.
In case of an incoming call, music playback is interrupted and only
continues when the call has ended.
For additional operating controls, use the controls on your audio output
device.

10. Operation

10.1. Selecting the audio source

 Press the MODE button on the remote control or the soundbar once or several
times to select the desired audio source.
The selected audio source is shown on the display:
Display
"STDBY"
"AUX"
"BLUE"
"HDMI1/HDMI2"
"ARC"
"OPT"

10.2. Setting the display brightness

 In standby mode or when the device is in use, press the
soundbar or the remote control to set one of three display brightness levels.

10.3. Setting the volume

 Press the Vol + button on the soundbar or on the remote control to increase the
volume.
 Press the Vol - button on the soundbar or on the remote control to decrease the
volume.
The current volume setting is shown on the display.
 Press and hold Vol + / Vol - to continuously increase/decrease the volume.
Release the button when the desired volume setting is displayed.
Operating mode
Standby mode
AUX IN operating mode
Bluetooth mode
HDMI IN 1 or HDMI IN 2 operating mode
HDMI OUT (ARC) operating mode
OPTICAL operating mode
button on the
DE
EN
FR
NL
IT
ES
61