Connecting The Speaker Output Terminals; Connecting The Speaker Wires - Pioneer PRS-A500 Manual Del Propietário

Connecting the Speaker Output
Terminals
1. Expose the end of the speaker wires
using nippers or a cutter by about
10 mm and twist.
2. Attach lugs to speaker wire ends.
Lugs not supplied.
• Use pliers, etc., to crimp lugs to wires.

Connecting the Speaker Wires

The speaker output mode can be two-channel (stereo) or one-channel (mono). Connect the
speaker leads to suit the mode according to the figures shown below.
Two-channel mode (stereo)
One-channel mode (mono)
Twist
10 mm
Lug
Speaker wire
3. Connect the speaker wires to the
speaker output terminals.
• Fix the speaker wires securely with the termi-
nal screws.
Terminal screw
Speaker output
terminal
Speaker wire
(Left)
Speaker
(Right)
Speaker
(Mono)
8