Testing - habitat et jardin Comfort 1436_103314 Manual Del Usuario

A． Available no matter the machine is on or off;
B． Press the key
indicates twinkling temp. Press
temp;
C． 5 seconds later, the controller display will back to the normal mode.
D． When you want to check setting temperature, press
the current setting.

Testing

１．Inspection before use
A. Check installation of the whole machine and the pipe connections according to
the pipe connecting drawing;
B. Check the electric wiring according to the electric wiring diagram and earthing
connection;
C. Make sure that the main machine power switch is off;
D. Check the temperature setting;
E. Check the air inlet and outlet.
２．Trial
The user must "Start the Pump before the Machine, and Turn off the Machine
A.
before the Pump", or the machine will be damaged;
B. The user should start the pump, check for any leakage of water; and
or to set water temperature. The controller
or
14
adjust to your required water
or to see
then set