suitable temperature in the thermostat, and then switch on power supply;
C. In order to protect the swimming pool heater, the machine is equipped with a
time lag starting function, when starting the machine, the blower will run 1
minutes earlier than the compressor;
D.
After the swimming pool heater starts up, check for any abnormal noise from
the machine.
Precautions
1. Attention
A.
Set proper temperature in order to get comfortable water temperature to avoid
overheating or overcooling;
Please don't stack substances that can block air flow near inlet or outlet area, or
B.
the efficiency of the heater will be reduced or even stopped;
C. Please don't put hands into outlet of the swimming pool heater, and don't
remove the screen of the fan at any time;
D.
If there are abnormal conditions such as noise, smell, smoke and electrical
leakage, please switch off the machine immediately and contact the local dealer.
Don't try to repair it yourself;
Don't use or stock combustible gas or liquid such as thinners, paint and fuel to
E.
avoid fire;
F.
In order to optimize the heating effect, please install heat preservation
insulation on pipes between swimming pool and the heater. During running
15