Turbosaver TS-SV30 Manual Del Usuario página 13

The vacuum sealing system #1
MAINTENANCE
• Always turn off and unplug the unit.
• Internal service work must be performed by certified personnel only.
• Make sure system is at room temperature.
Check for signs of damage including pulled cord or physical damage to system or heaters.
If any signs of physical damage are found, please send back to factory for replacement
parts.
Install the skirt
Hold the unit and align the unlocking symbol and the arrow, rotate the skirt in clockwise di-
rection until you can see the arrow and locking symbol are in the same horizontal position.
Uninstall the skirt
Hold the unit and rotate the skirt in anticlockwise direction to take off the skirt.
Maintenance (skirt/pump)
Turn the pump cap out of the lock position then pull off.
The skirt and pump cap can be placed into the dishwasher.
13