Allied Data Technologies Tornado TIPA-P Manual De Instalación página 25

Installing the Tornado Tipa-P in a Windows NT 4.0 environment
1. Close Windows and switch off the computer.
2. Mount the Tipa-P in a free PCI slot.
3. Take the RJ45 cable provided and click the plug into the RJ45 connection of your Tipa-P.
4. Switch on the computer and start up
Windows NT. First install Dial-Up
Networking.
When Dial-Up Networking has been installed,
RAS (Remote Access Setup) will
automatically be started up.
5. Click on 'Yes' to select a modem.
The 'Install New Modem' screen now
appears.
6. Tick the option 'Don't detect my modem, I
will select from a list' and click on 'Next'.
Allied Data Technologies
TORNADO TIPA-P
25