Publicidad
Idiomas disponibles
Idiomas disponibles
Gigabit Ethernet Desktop Switch • User Manual
Thank you for purchasing the INTELLINET NETWORK SOLUTIONS
Ethernet Desktop Switch, Model 523523 (24-port) or 523530 (16-port). For
specifications, go to www.intellinet-network.com.
PLACEMENT
Prior to use, it is recommended that the switch be placed/positioned:
• on a level surface that can support the weight of the switch (and any other
items that need to be considered);
• with a minimum of 25 mm (approx. 1") of clearance on the top and sides
for adequate ventilation;
• away from sources of electrical noise: radios, transmitters, broadband
amplifiers, etc.;
• where it cannot be affected by excessive moisture.
The switch includes brackets and screws for optional rack mounting.
1. Disconnect any cables from the switch.
2. Position a bracket over the mounting holes on one side of the switch and
secure it in place with screws.
3. Repeat Step 2 on the other side of the switch.
4. Position the switch in the rack and screw the brackets to the rack.
5. Reconnect any cables.
CONNECTIONS
• All ports on the switch support Auto-MDIX functionality, so you can use
straight or crossover UTP/STP cables to connect the RJ45 ports to PCs,
routers, hubs, other switches, etc.
• Use the included power adapter to connect the receptacle on the back of
the switch to a power outlet, and confirm that the Power LED lights.
LED
Status Operation
PWE
On
Power on
Off
Check connection
100/1000 Off
10 Mbps connection
Link/ACT On
Valid port connection
Blinking Data transmitted/received
Off
No link established
2
ENGLISH
1
3
5
7
PWE
2
4
6
8
English
Gigabit
™
9
11
13
15
100/
Link/Act
100/
Link/Act
10
12
14
16
1000
1000
Publicidad
