IRIS BLW-C2 Manual De Instrucciones página 6

HOW TO USE
Drying Shoes (manual settings)
Please close the air flap before use .
1. Add the shoe drying attachment to the end of the hose.
2. Insert the shoe drying attachment into the shoes.
Tips for faster drying:
• Remove excess water with a dry cloth .
• Loosen shoelaces and place them in the shoes .
3. Insert the power plug securely all the way into the electric
socket.
In standby mode, press any key to light up the power indicator and
enable settings selection .
4. Manual settings selection.
Select the running temperature and time according to the type of shoes .
Cloth Shoes
TEMPERATURE
Red
Press TEMPERATURE button to select
"High Temperature" (Red) .
TIMER
TIME MINS
Press TIMER button to set remaining time to
60 minutes .
The drying time differs due to wet conditions, shoe materials and types, room temperature,
and moisture levels . Please dry again if shoes are not sufficiently dried .
CAUTIONS
Leather, artificial leather and vinyl shoes may deform and change color from warm
temperatures . Please make sure to only select "Air Blast" (Blue) mode .
Leather Shoes, Boots
TEMPERATURE
Blue
Press TEMPERATURE button to select
"Air Blast" (Blue) .
TIMER
TIME MINS
Press TIMER button to set remaining time to
120 minutes .
9
5. Press START/ON button.
This product will display the remaining time after it starts running . It will
stop heating after set time has run out .
• If START/ON button is not pressed, product will return to standby
mode after five minutes .
• Press CLEAR/OFF button if you want to stop drying . It will stop
heating and then it will cool down the main body and hose with a
20 second air blast before it stops running .
6. Put the product away after use.
• Firmly grip the power plug to unplug it from the electric socket .
• Detach the shoe drying attachment from the hose .
• Refold the hose .
• Bundle up the power cord .
Drying Clothes (manual settings)
Please close the air flap before use .
1. Unfold the hose to face the air outlet towards clothes.
CAUTIONS
• Please make sure the clothes you're drying can withstand
temperatures higher than 158°F/70°C .
• Do not place the product directly underneath dripping clothes as
water droplets on the product may cause electric shock or
short-circuiting .
• To keep the hose from falling over, do not extend all the way out . To
adjust the angle of air flow, please incline the hose at the base of
the air outlet .
• The warm air temperature may cause damage to the cloth, such as
pilling .
2. Insert the power plug securely all the way into the electric socket.
In standby mode, press any key to light up the power indicator and enable
settings selection .
3. Manual settings selection.
Select the running temperature and time according to wetness of clothes .
Example: Set temperature to Low and set timer to 75 Minutes .
START/ON
10