Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
English
Fig. B
On/Off Switch (Fig. A)
CAUTION: Do not stare into area light lens.
Serious eye injury could result.
To turn the area light on, press the on/off/brightness
button
1
to one of the five brightness levels (roughly
500 lm / 1250 lm / 2500 lm / 3750 lm / 5000 lm).
To turn the area light off, press the on/off/brightness switch
and cycle through to the off position.
Magnets (Fig. A)
CAUTION: When the area light hangs by the
magnets, do not shake the area light or the object
from which it hangs. Do not hang the area light from
anything that is not secure. Personal injury or property
damage may occur.
CAUTION: Only use the magnets for hanging the
LED area light. The magnets are not intended to
support additional weight. Do not attach or hang
anything additional to the area light or risk of breakage
may occur.
WARNING: Do not stand directly under the area light
when it is being supported soley by the magnets.
The area light has four built in magnets
the base. These magnets are intended to hold the area light
in place on metal surfaces.
Rotating and Pivoting the Area Light
(Fig. C)
The area light can be rotated and pivoted to different
positions allowing the light to be aimed.
•
Use the handles
to rotate or pivot the light housing
5
to your desired position.
4
Fig. C
2
7
MAINTENANCE
Accessories
Recommended accessories for use with your lamp
are available at extra cost from your local dealer or
authorized service center. If you need assistance in
locating any accessory, please contact Mac Tools®, call
1-800-MAC-TOOLS (1-800-622-8665) or visit our website:
www.mactools.com.
6
on the bottom of
Repairs
Cleaning
5
WARNING: To reduce the risk of serious personal
injury, turn unit off and disconnect it from
power source before making any adjustments or
removing/installing attachments or accessories.
An accidental start-up can cause injury.
WARNING: Since accessories, other than those
offered by Mac Tools®, have not been tested with
this product, use of such accessories with this lamp
could be hazardous. To reduce the risk of injury, only
Mac Tools® recommended accessories should be used
with this product.
WARNING: To assure product SAFETY and
RELIABILITY, repairs, maintenance and adjustment
(including power cord repairs, and brush inspection
and replacement, when applicable) should be
performed by a Mac Tools® factory service center or
a Mac Tools® authorized service center. Always use
identical replacement parts.
WARNING: Blow dirt and dust out of all air vents with
clean, dry air at least once a week. To minimize the risk
of eye injury, always wear ANSI Z87.1 approved eye
protection when performing this procedure.
WARNING: Never use solvents or other harsh
chemicals for cleaning the non-metallic parts of
the lamp. These chemicals may weaken the plastic
materials used in these parts. Use a cloth dampened
only with water and mild soap. Never let any liquid get
inside the lamp; never immerse any part of the lamp
into a liquid.
5
Publicidad
Tabla de contenido
