Actuator Installation - OEG M 66 Instrucciones Para El Montaje

Actuator installation

Picture 5
1. In case of mounting the actuator on OEG mixing valves, example 1,
unscrew the plug 1a and fit it in the upper right position on valve's flange.
In case of mounting the actuator on other mixing valves, example 2, use
one of the supplied plugs A1 or A2 and fit it in the upper right position on
valve's flange.
2. Put the plug B on the shaft of mixing valve. Point the plug
arrow to the middle of the valve position indication plate.
3. Put the actuator C on plug B and fasten it with the screw E.
4. Put the indicator plate F onto the knob D.
5. Do the wiring connections as shown on picture 6.
Installation manual
3