NuStep TRS 4000 Manual De Instalación Y De Uso página 3

How to Install the NuStep
Remove only the four outer cap screws
1.
and lock-washers on armrest brackets
and discard. Do not remove armrests.
Position 51014 seat mount bracket over
2.
armrest brackets, start four 51039 flange
cap screws and tighten to 200 +/- 20 inlbs.
(23 +/- 2 Nm)
Remove one old shorter screw and install
3.
one 51041 storage hook using new longer
51042 screw. Repeat. Don't over tighten
screws.
4.
Insert 51033 cuff into 51035 strap pocket
aligning keyhole shapes. Make sure cuff
ends lie flat in pocket.
Leg Stabilizer
®