Disposal; Troubleshooting - HOLZMANN MASCHINEN LSR10HQ Manual De Instrucciones

Keep the tube clean and free of dirt to ensure a smooth operation of the plant.
Clean the surface of the guide rollers of accumulated debris.
Regularly check the air fittings for looseness, leaks, cracks or damage.
Occasionally check the mounting hardware for looseness or damage.
16

DISPOSAL

Observe the national waste disposal regulations. Never dispose of the
machine, machine components or equipment in residual waste. If necessary,
contact your local authorities for information on the disposal options
available. If you buy a new machine or an equivalent device from your
specialist retailer, he is obliged in certain countries to dispose of your old
machine properly.
17

TROUBLESHOOTING

The air supply necessarily interrupt when
repair work. Disconnect hose from the air
Trouble
It winds not completely
back
Locking will not work
Leaking hose
HOLZMANN MASCHINEN GmbH
Possible cause
 Coiled tubing unevenly
 At low spring tension
 To severe replacement hose
 Adjustable hose stop ring
 Hose rolled up too fast
 Hose reel mounted incorrectly
 Hose released too quickly
 damaged arresting
 damaged hose
 Loose hose clamp
 Worn rotating body seal
www.holzmann-maschinen.at
adjustment, maintenance,
supply!
Solution
 Roll up hose evenly
 replace spring
 Use appropriate replacement hose
 Adjust hose stop ring in the correct
position
 Roll up hose evenly slowly
 See Chapter 6 Assembly
 Lead to lock tube slowly
 replace locking unit
 replace hose
 Fix or replace hose clamp
 Replace rotating body seal
LSR10HQ, LSR15HQ
DISPOSAL
and
16