Compatible Devices; Tm2 X W Sensor; Deleting The Sensor - FAAC TM 2 X R MINI Manual Del Usuario

It detects movements caused by the wind on the awning arms.
To associate the sensor to the control unit, a remote control must be already me-
morized. Set the selector to the 0 position and then perform this sequence:
+
A B
To delete the sensor from the control unit, an already programmed remote control
must be used. Set the selector to the 0 position; if active wait for the sensor to go
off and then perform this sequence: I
+
A B
For the complete description of the functions of this device see the instruction
booklet that came in the box.
TM2 X R MINI

COMPATIBLE DEVICES

TM2 X W SENSOR

SETTING THE SENSOR
B

DELETING THE SENSOR

A
31
SET BUTTON
LED
SELECTOR
set
2 sec
set
2 sec
A4518_6H82_Rev.A