Setting The Clock; Eco Function - iSymphony M110 Manual De Usuario

Setting the Clock

When the AC power is connected, "AM 12:00" will appear on the display.
The clock can only be set while the unit is off.
Press the PROG/CLK button, the "AM" and hour digits begin to flash.
Press the SKIP/TUNING
Press the PROG/CLK button to confirm. The minute digits begin to flash.
Press the SKIP/TUNING
Press the PROG/CLK button to confirm.
Note: This unit uses 12 hour time format only.

ECO Function

You can select whether or not the clock is displayed while the unit is in standby mode. Selecting
ECO mode means the unit will use less electrical power while in standby mode.
To turn the clock display off:
Hold the SLEEP/ECO button for 3 seconds while the unit is in standby
mode. Display shows "ECO ON" and clock display disappears.
To turn the clock display on:
Hold the SLEEP/ECO button for 3 seconds while the unit is in stand
by mode. Display shows "ECO OFF" and clock display appears.
All manuals and user guides at all-guides.com
or buttons to adjust the hour.
or buttons to adjust the minute.
17
RAD
Press the FUNCTION button repeated
AM or FM frequency will appear on th
Press the STOP/BAND button to s
Tune to the desired station as follows:
Manual Tuning
Repeatedly press the SKIP/TUNING
frequency of the desired station. Use
stations that are not strong enough to
Automatic Tuning
Depress and hold the SKIP/TUNING
release the buttons. The Tuner will se
stop on that station. Repeat this proce
FM Stereo signal is indicated by the "
If the FM Stereo reception is noisy or
Press the ST/MONO button on the rem
Mono mode.