Sennheiser ASA 3000 Instrucciones Para El Uso página 22

Putting the unit into operation
22
Setting up the unit
The unit is suitable for use as table top or can
be mounted into a rack.
Fix the unit to a 19" rack by using the
supplied rack-mounting kit.
To set up the unit on an even, horizontal
surface, fix the four self-adhesive plastic
feet to the base of the unit.
Note:
Some furniture surfaces have been treated
with varnish, polish or synthetics which
might cause stains when they come into
contact with other synthetics. Despite a
thorough testing of the synthetics used by
us, we cannot rule out the possibility of
discoloration, since we don't know your
furniture. To protect your furniture, we
recommend placing the unit on a non-slip
pad.
Connecting the antennas
You can connect the following antenna types
to the BNC sockets
modules:
! two GZA 1036 or A 2003-UHF passive
antennas or
! two A 12 active antennas or
! two GZA 1036 passive antennas with
AB 1036 antenna boosters.
The ASA 3000 routes the antenna signals
without loss to the respective antenna
outputs.
and of the input