Sennheiser ASA 3000 Instrucciones Para El Uso página 24

Putting the unit into operation
24
Connecting the mains cable
Connect the mains cable to the IEC mains
socket and to the mains.
The ASA 3000 has no power switch. The unit
is ready for operation as soon as it is
connected to the mains.
Note:
The ASA 3000 can be connected to any
mains power supply with 100 V to 240 V AC
(50 to 60 Hz).
Exchanging the input modules
The unit is fitted with two wideband input
modules (470 to 870 MHz) which are suitable
for most applications. However, to ensure
optimum reception reliability, we recommend
using two selective input modules (60-MHz
window) (siehe "Accessories" auf Seite 27).
When using the selective input modules:
! Make sure that all transmitters and receivers
of your transmission system operate within
the frequency window of the selective input
modules!
When using the wideband input modules:
! Use an active antenna (e.g. A 12 AD
antenna) or an antenna with antenna
booster (e.g. GZA 1036 antenna with AB
1036 antenna booster).
To exchange the input modules: