EX
(1)
(2)
(3)
(4)
Device:
(5)
Manufacturer:
(6)
Address:
(7)
This device type and its various permissible versions are specified in the appendix to this Type
Examination Certificate.
(8)
The EXAM BBG Prüf- und Zertifizier GmbH certification body, notified body no. 0158 in
accordance with Article 9 of the European Parliament and Council Directive 94/9/EC of 23 March
1994, certifies that this device has been found to comply with the Essential Health and Safety
Requirements relating to the design and construction of protective devices and systems intended for
use in potentially explosive atmospheres according to Annex II to the Directive.
The test results are recorded in the test report BVS PP 05.2005 EC.
(9)
The compliance of the device with the Essential Health and Safety Requirements has been assured
by compliance with
EN 50014:1997 + A1 – A2
EN 50020:2002
(10)
If the character "X" is placed after the certificate number, it indicates that the device is subject to
special requirements for safe use as referenced in the appendix to this certificate.
(11)
This EC type examination certificate refers only to the design and construction of the specified
device in accordance with Council Directive 94/9/EC.
Further requirements of this Directive, which are not covered by this certificate, apply to the
manufacture and supply of this device.
(12)
The marking of the device shall include the following details:
Ex II (2)G [EEx ib] IIC
_______________________
Certification Body
Dinnendahlstrasse 9 44809 Bochum
-
English translation of the German original certificate –
EC Type Examination Certificate
- Council Directive 94/9/EC -
Protective devices and systems intended for use
in potentially explosive atmospheres
BVS 05 ATEX E 019
Process Board Type EXMFE5
FLOW COMP Systemtechnik GmbH
D – 44357 Dortmund
General Requirements
Intrinsic Safety 'i'
EXAM BBG Prüf- und Zertifizier GmbH
Bochum, 31 January 2005
Page 1 of 3 of BVS 05 ATEX E 019
This certificate may only be circulated without alteration.
Tel. +49 (201) 172 3947
EXAM
BBG Prüf- und Zertifizier GmbH
_____________________
Head of Unit
Fax +49 (201) 172 3948