Using The Energy Saving Feature; Selecting The Source; Editing The Input Source Names - Samsung LE32R7 Instrucciones Del Propietario

using the energy Saving Feature

Selecting the Source

editing the input Source names

This function adjusts the brightness of the TV so as to reduce power consumption.
When you watching TV at night, set the "Energy Saving " mode option to "High" so
as to reduce the dazzling of your eyes as well as the power consumption.
1. Press the menu button to display the on-screen menu.
Press the 5 or 6 button to select "Setup", then press the enter/oK
2. Press the 5 or 6 button to select "Energy Saving", then press the enter/oK
3. S elect the required option (Off, Low, Medium, High) by pressing the 5 or 6 button.
Press the enter/oK
4. Press the exit button to exit.
You can select among external sources connected to your TV's input jacks.
1.
Press the menu button to display the menu.
Press the enter/oK
2.
Press the enter/oK
W hen no external device is connected to your set, only "TV", "Ext.", "Ext.2", "DTV" are
activated in the "Source List". "AV", "S-Video", "Component", "PC", "HDMI" are activated
only when they are connected to your set.
3.
Select the required device by pressing the 5 or 6 button.
Press the enter/oK
P ress the SourCe button on the remote control to toggel between all the available source.
TV mode can be selected by pressing the tV/dtV button, number buttons(0~9), and the
P / button on the remote control. But it cannot be selected using the SourCe button.
Name the device connected to the input jacks to make your input source
selection easier.
1. Press the menu button to display the menu.
Press the enter/oK
2. Press the 5 or 6 button to select "Edit Name", then press the enter/oK
3. Press the 5 or 6 button to select the device that you wish to edit.
Press the enter/oK
4. Press the 5 or 6 button to select the required device.
Press the enter/oK
5. Press the exit button to exit.
English-8
button.
button, to select "Input".
button again, to select "Source List".
button.
button, to select "Input".
button.
button.
button.
button.
button.