Aux In Mode - Naxa NRC-190 Manual De Operación

BUILT-IN QI WIRELESS CHARGER
1.
Place a Qi supported mobile device on the
center of the charging surface as illustrated
below. The Qi inidicator light will display and
your mobile device should begin charging.
2.
When charging has completed, please
remove the mobile device from the unit.
Check the mobile device's charging status using
the charging icon displayed on the screen.
Page 10
BUILT-IN USB CHARGER
1.
Connect the USB plug from the external USB
device to the USB Charger port at the back of
the unit.
2.
Unit should begin to charge.
When charging has completed, please
3.
remove the mobile device from the unit.

AUX IN MODE

Connect the AUX cable from the output jack
1.
of your MP3 player or mobile phone to the
AUX input jack on the Radio.
2. Press the /MODE button twice to access the
AUX input. AUX will be displayed on the
screen.
3.
Adjust the volume on both your MP3 player
or mobile device and on the unit to your
desired level.
Naxa Electronics