Listening To The Radio - Naxa NRC-190 Manual De Operación

Listening to the Radio

1.
Press the /MODE button once to access the
Radio input. The radio station number will
display on the screen. (87.5 - 108)
2.
Press and hold the
the auto search and play to cycle through
di erent radio stations.
If reception is poor, press and release the
3.
or buttons to ne tune your desired radio
station.
4.
To adjust the volume, press the VOL button
once followed by the
adjust your desired level. (L01- L15)
5. Press and hold the
OFF the radio.
Radio Station Preset
1. Press the /MODE button once to access the
Radio input and select your desired station.
www.naxa.com
or buttons to engage
or buttons to
/MODE button to turn
2. Press and hold the SET/MEM button, "01-20"
will appear on the screen and ash.
3. Press the or
select the program number of your choice.
4.
Then press the SET/MEM button again to
store it.
5. Repeat the steps above until all the desired
radio stations are stored in the program list.
6.
Once you have completed and set your radio
station presets, simply press the SET/MEM
button repeatedly to select and play your
desired stored radio station.
If the back up batteries aren't installed, the preset
stations may erase upon power failure to the unit.
The stored radio stations can be replaced by stor-
ing another new radio station.
A total of 20 FM radio stations can be stored in
the program.
buttons to repeatedly to
Page 9